Main structural features of multi-function extraction tank:
1. Heating form: the jacket is heated, and no heat source is formed at the bottom to form a heating dead angle.
2, extraction efficiency: static heating mode, because there is no heat source at the bottom to form a heating dead angle, so that the bottom medicine is not completely extracted. The floating medicinal material (slowly immersed in the extract after boiling) is not completely extracted from other medicinal materials. Device structure issues reduce extraction efficiency.
3, slag discharge: cone extraction is mostly large equipment, considering the structure of its seal and bottom heat source. However, it is more difficult to discharge and slag during the production process. Due to the easy clogging of the small area of ??the bottom material, the liquid discharge is not smooth, and the slag is easy to bridge the bridge, which requires manual assisted slag discharge. The labor intensity of the worker is large, and the occupation time is not large.
4. Operation safety: It is difficult to control the secondary steam flow after the jacket is heated and boiled. Due to the instability of the system steam pressure, the operator needs to control the valve to control the steam pressure at any time to maintain the micro-boiling state and control. Heating relative to the heating area is large) It is easy to cause the secondary steam flow to carry the saponin and the floating medicinal material to block the pipeline forming equipment to produce pressure bump. Bring damage to production personnel and bring losses to production.
5. Installation space: This structure has a large diameter and a large bottom, and the occupied space is relatively small.
無錫樂洋化機制造有限公司 地 址：無錫市濱湖區雪浪街道山水城科技工業園28-2號